Factory Reset your Fanvil Device

Factory Reset your Fanvil Device

Factory Reset your Fanvil X or H phone

  1. Turn off the device (By removing power supply or Ethernet Cable if POE.
  2. Hold the “#” button and turn the device on (Make sure you are pressing the button until Post Mode Shows Up).
  3. The message “Post Mode” will appear on the screen.
  4. As soon as the message “Post Mode” appears dial “*”, “#”, “1”, “6”, “8”. [Star Hash One Six Eight]
  5. You should then see the screen text change to "Flash Clear" or "Clearing All", This is normal. Keep waiting
  6. Wait 5 seconds until “Conf Rest” or "Phone Reset" [Dependent on Firmware Version] is shown.
  7. Wait 5 Seconds after Conf Rest / Phone Reset has displayed then UnPlug and Replug in your Device (Your phone will be successfully reset after restarting the device.)

    • Related Articles

    • Reset Yealink W60B

      From The Base 1. Power off the unit by unplugging the power cord from the back (for PoE, disconnect the network cable). 2. Wait for 15 seconds. 3. With the unit unplugged, press and hold the connect button on the base station. 4. While still holding ...